Описание Mark Levinson Nº326S
Двухблочный линейный балансный предусилитель
Технические характеристики Mark Levinson Nº326S
Connector Complement
3 balanced (female XLR) stereo inputs - 4 single-ended (Mark Levinson-RCA) stereo inputs 1 balanced (male XLR) stereo main output 1 single-ended (Mark Levinson-RCA) stereo main output 2 single-ended (Mark Levinson-RCA) stereo record outputs 2 8-pin RJ-45 connectors for Link communication 1 6-pin modular RJ-11 connector for RS-232 communication 1 3.5mm mini-jack for trigger output 1 3.5mm mini-jack for ir input 1 phono ground terminal 1 IEC-standard AC mains connector
Crosstalk
less than -94dBV, 20Hz to 20KHz (input terminated)
Dimensions
Width: 17.75" Height: 2.92" Depth: 13.58"
Frequency Repsonse
10 to 40kHz, ±0.2 dB
Gain
0, 6, 12, or 18dB (line-level stage)
Gain Resolution
1.0dB increments up to 23.0dB on front panel display (-57dB) 0.1dB increments above 23.0dB on front panel display (-57dB)
Input Impedance
100k
Input Overload Gain Setting
XLR Connectors/RCA Connectors +18dB 1.6V 0.8V +12dB 3.3V, 1.6V +6dB, 6.6V 3.3V 0dB 13.2V 6.6V
Notes
Specifications are subject to change without notice. Unless otherwise specified, these specifications indicate nominal values measured over a 20Hz to 20kHz bandwidth through balanced (XLR) connections.
Operating Voltage
100, 120, 220, or 230V AC power at 50 or 60Hz (preset)
Power Consumption
50W maximum
Residual Noise
20Hz to 20kHz (input terminated less than -94dBV)
THD + Noise
less than 0.001%
Volume Control Range
80.0dB (maximum)
Weight
30 pounds (14kg)