В Mark Levinson № 502 все сделано для достижения бескомпромиссного качества аудио и видео: раздельные источники питания в экранированных отсеках, 18-слойные печатные платы, изолированные от шасси входные/выходные разъемы, балансная схемотехника и линии передачи LVDS (Low Voltage Differential Signal), помогающие снизить уровень джиттера. Цифровая регулировка громкости осуществляется в пределах 120dB, что позволяет полностью сохранить исходное разрешение сигналов. В дополнение к стандартным декодерам Dolby и DTS процессор N?502 оснащен фирменной системой HarmanInternationalLogic7, есть у него и самая совершенная на сегодня система автокалибровки акустики под свойства помещения.
Шесть HDMI входов, каждый со своим приемопередатчиком, обеспечивают исключительно быструю коммутацию, а также предпросмотр сигнала с одного HDMIвхода при одновременном показе на большом экране другого. Два HDMIвыхода могут выдавать сигналы на пару дисплеев. На видеоплате N?502 размещены два процессора GennumVXP вещательного уровня с 10-битовой обработкой и 7.8 Гигафлопс вычислительной мощи, что позволяет с легкостью выдавать видео с разрешением 1080p/24Гц. Новая медиа–консоль N? 502 – поразительно мощный и гибкий центр домашнего театра высшего класса, выполненный в лучших традициях MarkLevinson и способный удовлетворить запросы самых требовательных энтузиастов.
Описание Mark Levinson № 502
Двухблочный аудио/видео процессор
Технические характеристики Mark Levinson № 502
A/D Conversion: 24-bit/192kHz, PCM multibit SD
Analog Audio Inputs: One unbalanced eight-channel input array, RCA connectors, Four unbalanced stereo pairs, RCA connectors, Two balanced stereo pairs, XLR connectors, Four microphone inputs, 3.5mm mini plug, accepts either stereo plug (tip/ring/sleeve) or mono plug (tip/sleeve)
Analog Audio Outputs: One unbalanced 7.4-channel array, RCA connectors, One balanced 7.4-channel array, XLR connectors, Remote Zone, One unbalanced stereo pair, RCA connectors
Analog Video Inputs: Four component video - one BNC, three RCA connectors (Y, Pb, Pr), Three S-Video connectors, Three composite video, RCA connectors
Analog Video Outputs: One component with three BNC connectors (Y, Pb, Pr), One composite monitor, RCA connector
Component A/D Conversion: 12-bit, 110MHz (4? SD, 2? ED, 1? HD oversampling)
Component D/A Conversion: 14-bit, oversampling to 216MHz
Component Input/Output Levels: Y: 1.0Vp-p with 75ohms load (700mVp-p video), Pb/Pr: ±350mV with 75ohm load (700mVp-p)
Component Video Compatibility: 480/576i, 480/576p, 720p and 1080i
Composite Input Level: 1.0Vp-p with 75ohm load
Composite Monitor Output Level: 1.0Vp-p with 75ohm load
Control Inputs and Outputs: One RS-232 port, RJ-11 connector, One Ethernet port, RJ-45 connector, One ML Link port, RJ-45 connector, Four programmable trigger outputs, 3.5mm mini plug, accepts either stereo plug (tip/ring/sleeve) or mono plug (tip/sleeve). Output Voltage: 12V. Output Current: 100mA. One IR receiver, on front panel. One IR input jack, 3.5mm mini plug, accepts either stereo plug (tip/ring/sleeve) or mono plug (tip/ring), 12V.
D/A Conversion: 24-bit/192kHz, PCM multibit SD
Digital Audio Inputs: Six S/P-DIF coaxial (RCA) and three S/P-DIF optical (TOSlink) connectors, Coaxial and optical input connectors conform to IEC-958, S/P-DIF standards, Two AES/EBU inputs, XLR connectors
Digital Audio Samples: 32, 44.1, 48, 88.2, 96, 176.4 and 192kHz
Dimensions: Height (with feet): 9.46 inches (240.4mm), Height (without feet): 8.7 inches (221.0mm), Width: 17.48 inches (444mm), Depth: 17.4 inches (442.4mm)
Dynamic Range: 94dB (Reference level: 1kHz, 30kHz LPF)
HDMI Input Formats: Video: 480/576i, 480/576p, 720p, 1080i, 1080p
Audio: Dolby Digital, DTS and PCM (32, 44.1, 48, 88.2, 96, 176.4, 192kHz)
HDMI Inputs: Six HDMI, Type A, Version 1.1, 19-pin connectors
HDMI Output Formats: Video: 480/576i, 480/576p, 720p, 1080i, 1080p
Audio: Dolby Digital, DTS and PCM (32, 44.1, 48, 88.2, 96, 176.4 and 192kHz)
HDMI Outputs: Two HDMI Type A, Version 1.1, 19-pin connectors
Input Impedance: 100Kohm
Maximum Input Level: 7.5V/15Vrms RCA/XLR
Maximum Output Level: 7.5V/15Vrms RCA/XLR
Operating Temperature: 0° to 35°C (32° to 95°F)
Power Consumption: 175W
Power Requirements: 120V~, 60Hz / 100/220/230V~, 50-60Hz; factory set for destination country
Rack Mounting: Optional rack mount kit is available, refer to chapter 1: "Getting Started" in the owner’s manual for ordering details
Reference Input Level: 2Vrms
Reference Output Level: 1.5V/3Vrms RCA/XLR
Relative Humidity: 95% maximum without condensation
Remote Control: Handheld, back-lit IR operation; requires two AAA batteries (included)
S-Video and Composite A/D Conversion: 12-bit, 110MHz (4? SD, 2? ED, 1? HD oversampling)
S-Video and Composite Compatibility: NTSC/PAL
S-Video Input Level: Y (Luma): 1.0Vp-p with 75ohm load (700mVp-p video)
C (Chroma): 300mVp-p with 75ohm load
Signal-to-Noise Ratio: 94dB (Reference level: 1kHz, 30kHz LPF)
Storage Temperature: -30° to 75°C (-22° to 167°F)
THD + N: 94dB (Reference level: 1kHz, 30kHz LPF)
Weight: Net weight: 54.5lbs (24.6kg)
Shipping weight: 71lbs (32.5kg)